Personal profile
Biography
A/Prof Vanissorn Vimonsatit (or Sorn) joined the Macquarie School of Engineering, Civil Engineering in February 2020. Sorn received a Bachelor of Engineering in Civil Engineering from Kasetsart University, Thailand, Master of Engineering in Structural Engineering from Asian Institute of Technology, Thailand, and PhD from the University of New South Wales, Australia. Sorn has a broad range of experience in researches and engineering practices in the construction industry. Sorn worked as a practicing structural engineer for over 10 years in the design and construction of tall buildings, then worked as an academic at Curtin University for 12 years before joining Macquarie University. Her research interests are AI for material and structural design, buildability, construction materials, multiscaling, structural engineering, and sustainability.
Education/Academic qualification
Structural Engineering, PhD
Structural Engineering, M.Eng.
Civil Engineering, B.Eng.
External positions
Adjunct Associate Professor, Curtin University
2020 → …
Director, Bridge Engineering Institute
2018 → …
Australasia Representative, International Structural Engineering and Construction Society
2012 → …
Fingerprint
- 1 Similar Profiles
Collaborations and top research areas from the last five years
-
SmartCrete CRC 24.0182: Supplementary Cementitious Materials: Low Carbon – High Performance Products for the Construction Sector
Vimonsatit, S. (Primary Chief Investigator), Shen, C. (Chief Investigator), Heidrich, C. (Chief Investigator), South, W. (Other), van Rooyen, G. (Chief Investigator) & Baweja, D. (Other)
1/04/25 → 31/03/27
Project: Research
-
SmartCrete: Graphene Concrete for Sustainable Building and Infrastructure Assets (23.0164)
Vimonsatit, S. (Primary Chief Investigator), Mendis, P. (Chief Investigator), Booy, M. (Partner Investigator) & Kerley, M. (Partner Investigator)
19/02/24 → 18/02/25
Project: Research
-
SmartCrete 21.PP.0107: 21.PP.0107: Protocol development for intelligent monitoring of concrete corrosion in marine environments
Salasi, M. (Chief Investigator), Iannuzzi, M. (Chief Investigator), Pojtanabuntoeng, T. (Chief Investigator), Chegenizadeh, A. (Chief Investigator), Khan, M. (Chief Investigator), Green, W. (Chief Investigator), Hedderwick, C. (Chief Investigator), Farhat, H. (Chief Investigator), Pikor, G. (Chief Investigator), Vimonsatit, S. (Primary Chief Investigator) & Withford, M. (Chief Investigator)
1/11/22 → 1/07/25
Project: Research
-
MQRAS R1 22: 3D PRINTED STRUCTURES USING SUSTAINABLE BIOCOMPOSITES MATERIALS – TOWARDS GREEN PREFABRICATION
Ghanbari-Ghazijahani, T. (Primary Chief Investigator), Withford, M. (Chief Investigator), Abbassi, R. (Chief Investigator), Vimonsatit, S. (Chief Investigator), Valipour, H. (Associate Investigator) & Lutze, D. (Partner Investigator)
1/08/22 → 31/07/23
Project: Research
-
Embedded sensing system for continuous crack monitoring in concrete pavements
Asadnia, M. (Primary Chief Investigator), Abbassi, R. (Chief Investigator), Withford, M. (Chief Investigator), Beheshti, A. (Chief Investigator), Salehi, F. (Chief Investigator), Vimonsatit, S. (Chief Investigator), Mukhopadhyay, S. (Chief Investigator), Alipour Esgandani, G. (Chief Investigator), Garaniya, V. (Chief Investigator), Srivastava , H. (Other), Asadi, H. (Other), Henwood , S. (Other), Rahnamayiezekavat , P. (Partner Investigator), Ben, B. (Other), Rushmer, T. (Chief Investigator), Clark, S. (Chief Investigator) & Ghanbari-Ghazijahani, T. (Chief Investigator)
Macquarie University, Transport For NSW
29/04/22 → 30/03/26
Project: Research
Research Outputs
-
3D-printed piezoresistive nanocomposite polymer for stress assessment in axial load-bearing structural systems
Sathorn, S., Razbin, M., Moshizii, S. A., Salehian, M., Wu, S. & Vimonsatit, S., Nov 2025, In: Proceedings of International Structural Engineering and Construction. 12, 1, p. CON-26-1-CON-26-5 5 p.Research output: Contribution to journal › Conference paper › peer-review
Open AccessFile -
A comprehensive study of the macro-scale performance of graphene oxide enhanced low carbon concrete
Ginigaddara, T., Devapura, P., Vimonsatit, V., Booy, M., Mendis, P. & Satsangi, R., Sept 2025, In: Construction Materials. 5, 3, p. 1-32 32 p., 47.Research output: Contribution to journal › Article › peer-review
Open AccessFile6 Link opens in a new tab Citations (Scopus) -
A state-of-the-art review on the influence of porosity on the compressive strength of porous concrete for infrastructure applications
Abousnina, R., Aljuaydi, F., Benabed, B., Almabrok, M. H. & Vimonsatit, V., Jul 2025, In: Buildings. 15, 13, p. 1-35 35 p., 2311.Research output: Contribution to journal › Review article › peer-review
Open AccessFile13 Link opens in a new tab Citations (Scopus) -
A systematic approach for optimising water to binder ratio for low carbon concrete
Srivastava, H. K., Sathorn, S., Vimonsatit, V. & Clark, S., Nov 2025, In: Proceedings of International Structural Engineering and Construction. 12, 1, p. CTE-38-1-CTE-38-6 6 p.Research output: Contribution to journal › Conference paper › peer-review
Open AccessFile1 Link opens in a new tab Citation (Scopus) -
A systematic approach for selection of fit-for-purpose low-carbon concrete for various bridge elements to reduce the net embodied carbon of a bridge project
Srivastava, H. K., Vimonsatit, V. & Clark, S. M., 13 Oct 2025, In: Infrastructures. 10, 10, p. 1-18 18 p., 274.Research output: Contribution to journal › Article › peer-review
Open AccessFile