A spiral-shaped printed monopole antenna for mobile communications

Yuehe Ge; Karu P. Esselle; Trevor S. Bird

doi:10.1109/APS.2006.1711420

A spiral-shaped printed monopole antenna for mobile communications

Yuehe Ge, Karu P. Esselle, Trevor S. Bird

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

9 Citations (Scopus)

182 Downloads (Pure)

Abstract

A planar monopole antenna consisting of a printed metal strip of rectangular spiral shape is studied. The spiral generates two resonance modes and radiates at two frequency bands. An example design is given where the lower operating band covers the GSM900 band, and the upper operating band covers DCS1800, PCS 1900 and UMTS2000 bands. This multi-band antenna is compact and lightweight and it can be fabricated at very low cost by etching the spiral on an FR4/Epoxy substrate and feeding with a 50Omega microstrip line.

Original language	English
Title of host publication	Proceedings of 2006 IEEE Antennas and Propagation Society International Symposium
Place of Publication	USA
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Number of pages	4
ISBN (Print)	1424401232
DOIs	https://doi.org/10.1109/APS.2006.1711420
Publication status	Published - 2006
Event	2006 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science and AMEREM Meetings - Albuquerque, United States Duration: 9 Jul 2006 → 14 Jul 2006

Conference

Conference	2006 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science and AMEREM Meetings
Country/Territory	United States
City	Albuquerque
Period	9/07/06 → 14/07/06

Bibliographical note

Copyright 2006 IEEE. Reprinted from IEEE Antennas and Propagation Society International Symposium 2006. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Macquarie University’s products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.

Keywords

3G mobile communication
antenna feeds
cellular radio
microstrip antennas
microstrip lines
monopole antennas
multifrequency antennas
resonance
spiral antennas

Access to Document

10.1109/APS.2006.1711420

Publisher version (open access)Final published version, 545 KBLicence: Unspecified

Cite this

@inproceedings{eb1b137d2f194fdb897ebed9d467c500,

title = "A spiral-shaped printed monopole antenna for mobile communications",

abstract = "A planar monopole antenna consisting of a printed metal strip of rectangular spiral shape is studied. The spiral generates two resonance modes and radiates at two frequency bands. An example design is given where the lower operating band covers the GSM900 band, and the upper operating band covers DCS1800, PCS 1900 and UMTS2000 bands. This multi-band antenna is compact and lightweight and it can be fabricated at very low cost by etching the spiral on an FR4/Epoxy substrate and feeding with a 50Omega microstrip line.",

keywords = "3G mobile communication, antenna feeds, cellular radio, microstrip antennas, microstrip lines, monopole antennas, multifrequency antennas, resonance, spiral antennas",

author = "Yuehe Ge and Esselle, {Karu P.} and Bird, {Trevor S.}",

note = "Copyright 2006 IEEE. Reprinted from IEEE Antennas and Propagation Society International Symposium 2006. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Macquarie University{\textquoteright}s products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.; 2006 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science and AMEREM Meetings ; Conference date: 09-07-2006 Through 14-07-2006",

year = "2006",

doi = "10.1109/APS.2006.1711420",

language = "English",

isbn = "1424401232",

booktitle = "Proceedings of 2006 IEEE Antennas and Propagation Society International Symposium",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

}

Ge, Y, Esselle, KP & Bird, TS 2006, A spiral-shaped printed monopole antenna for mobile communications. in Proceedings of 2006 IEEE Antennas and Propagation Society International Symposium. Institute of Electrical and Electronics Engineers (IEEE), USA, 2006 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science and AMEREM Meetings, Albuquerque, New Mexico, United States, 9/07/06. https://doi.org/10.1109/APS.2006.1711420

A spiral-shaped printed monopole antenna for mobile communications. / Ge, Yuehe; Esselle, Karu P.; Bird, Trevor S.

Proceedings of 2006 IEEE Antennas and Propagation Society International Symposium. USA : Institute of Electrical and Electronics Engineers (IEEE), 2006.

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

TY - GEN

T1 - A spiral-shaped printed monopole antenna for mobile communications

AU - Ge, Yuehe

AU - Esselle, Karu P.

AU - Bird, Trevor S.

N1 - Copyright 2006 IEEE. Reprinted from IEEE Antennas and Propagation Society International Symposium 2006. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Macquarie University’s products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.

PY - 2006

Y1 - 2006

N2 - A planar monopole antenna consisting of a printed metal strip of rectangular spiral shape is studied. The spiral generates two resonance modes and radiates at two frequency bands. An example design is given where the lower operating band covers the GSM900 band, and the upper operating band covers DCS1800, PCS 1900 and UMTS2000 bands. This multi-band antenna is compact and lightweight and it can be fabricated at very low cost by etching the spiral on an FR4/Epoxy substrate and feeding with a 50Omega microstrip line.

AB - A planar monopole antenna consisting of a printed metal strip of rectangular spiral shape is studied. The spiral generates two resonance modes and radiates at two frequency bands. An example design is given where the lower operating band covers the GSM900 band, and the upper operating band covers DCS1800, PCS 1900 and UMTS2000 bands. This multi-band antenna is compact and lightweight and it can be fabricated at very low cost by etching the spiral on an FR4/Epoxy substrate and feeding with a 50Omega microstrip line.

KW - 3G mobile communication

KW - antenna feeds

KW - cellular radio

KW - microstrip antennas

KW - microstrip lines

KW - monopole antennas

KW - multifrequency antennas

KW - resonance

KW - spiral antennas

U2 - 10.1109/APS.2006.1711420

DO - 10.1109/APS.2006.1711420

M3 - Conference proceeding contribution

SN - 1424401232

BT - Proceedings of 2006 IEEE Antennas and Propagation Society International Symposium

PB - Institute of Electrical and Electronics Engineers (IEEE)

CY - USA

T2 - 2006 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science and AMEREM Meetings

Y2 - 9 July 2006 through 14 July 2006

ER -

A spiral-shaped printed monopole antenna for mobile communications

Abstract

Conference

Bibliographical note

Keywords

Access to Document

Fingerprint

Cite this