Dual beam printed antenna for vehicular communications

M. Orefice; Ladislau Matekovits; P. Pirinoli; G. Vecchi

doi:10.1109/APS.1996.549787

Dual beam printed antenna for vehicular communications

M. Orefice^*, Ladislau Matekovits, P. Pirinoli, G. Vecchi

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

6 Citations (Scopus)

Abstract

In this paper a novel printed antenna with dual switchable beams for vehicular communications is presented. The antenna consists of two planar microstrip subarrays, fed by two different ports. Depending on the input ports, the subarray beams are switched to create separate broadside beams or a single endfire beam. In this way a coverage of more than 180° is ensured with a relatively high directivity.

Original language	English
Title of host publication	1996 IEEE Antennas and Propagation Society International Symposium
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	1096-1099
Number of pages	4
Volume	2
ISBN (Print)	0780332164
DOIs	https://doi.org/10.1109/APS.1996.549787
Publication status	Published - 1996
Externally published	Yes
Event	1996 IEEE Antennas and Propagation-Society Symposium / USNC/URSI National Radio Science Meeting - Baltimore, United States Duration: 21 Jul 1996 → 26 Jul 1996

Conference

Conference	1996 IEEE Antennas and Propagation-Society Symposium / USNC/URSI National Radio Science Meeting
Country/Territory	United States
City	Baltimore
Period	21/07/96 → 26/07/96

Access to Document

10.1109/APS.1996.549787

Cite this

@inproceedings{429c56dce843424ebfcde2bf7fd11aac,

title = "Dual beam printed antenna for vehicular communications",

abstract = "In this paper a novel printed antenna with dual switchable beams for vehicular communications is presented. The antenna consists of two planar microstrip subarrays, fed by two different ports. Depending on the input ports, the subarray beams are switched to create separate broadside beams or a single endfire beam. In this way a coverage of more than 180° is ensured with a relatively high directivity.",

author = "M. Orefice and Ladislau Matekovits and P. Pirinoli and G. Vecchi",

year = "1996",

doi = "10.1109/APS.1996.549787",

language = "English",

isbn = "0780332164",

volume = "2",

pages = "1096--1099",

booktitle = "1996 IEEE Antennas and Propagation Society International Symposium",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

note = "1996 IEEE Antennas and Propagation-Society Symposium / USNC/URSI National Radio Science Meeting ; Conference date: 21-07-1996 Through 26-07-1996",

}

Orefice, M, Matekovits, L, Pirinoli, P & Vecchi, G 1996, Dual beam printed antenna for vehicular communications. in 1996 IEEE Antennas and Propagation Society International Symposium. vol. 2, 549787, Institute of Electrical and Electronics Engineers (IEEE), pp. 1096-1099, 1996 IEEE Antennas and Propagation-Society Symposium / USNC/URSI National Radio Science Meeting, Baltimore, Maryland, United States, 21/07/96. https://doi.org/10.1109/APS.1996.549787

Dual beam printed antenna for vehicular communications. / Orefice, M.; Matekovits, Ladislau; Pirinoli, P. et al.
1996 IEEE Antennas and Propagation Society International Symposium. Vol. 2 Institute of Electrical and Electronics Engineers (IEEE), 1996. p. 1096-1099 549787.

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

TY - GEN

T1 - Dual beam printed antenna for vehicular communications

AU - Orefice, M.

AU - Matekovits, Ladislau

AU - Pirinoli, P.

AU - Vecchi, G.

PY - 1996

Y1 - 1996

N2 - In this paper a novel printed antenna with dual switchable beams for vehicular communications is presented. The antenna consists of two planar microstrip subarrays, fed by two different ports. Depending on the input ports, the subarray beams are switched to create separate broadside beams or a single endfire beam. In this way a coverage of more than 180° is ensured with a relatively high directivity.

AB - In this paper a novel printed antenna with dual switchable beams for vehicular communications is presented. The antenna consists of two planar microstrip subarrays, fed by two different ports. Depending on the input ports, the subarray beams are switched to create separate broadside beams or a single endfire beam. In this way a coverage of more than 180° is ensured with a relatively high directivity.

UR - http://www.scopus.com/inward/record.url?scp=0029748230&partnerID=8YFLogxK

U2 - 10.1109/APS.1996.549787

DO - 10.1109/APS.1996.549787

M3 - Conference proceeding contribution

AN - SCOPUS:0029748230

SN - 0780332164

VL - 2

SP - 1096

EP - 1099

BT - 1996 IEEE Antennas and Propagation Society International Symposium

PB - Institute of Electrical and Electronics Engineers (IEEE)

T2 - 1996 IEEE Antennas and Propagation-Society Symposium / USNC/URSI National Radio Science Meeting

Y2 - 21 July 1996 through 26 July 1996

ER -

Dual beam printed antenna for vehicular communications

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this