Harmonic balance method used for harmonics calculation and prediction in power systems

Junwei Lu; Seyedfoad Taghizadeh; M. J. Hossain; Xiaojun Zhao

doi:10.1109/AUPEC.2016.7749373

Harmonic balance method used for harmonics calculation and prediction in power systems

Junwei Lu, Seyedfoad Taghizadeh, M. J. Hossain, Xiaojun Zhao

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

Abstract

In power systems harmonic distortion is mainly caused by non-linear loads and power electronics used in different devices and distributed renewable energy systems. In recent years, the presence of non-linear loads and the increasing number of distributed energy resource (DER) units in electrical grids contribute significantly to change the characteristics of voltage and current waveforms in power systems. This paper proposes a novel accurate and effective harmonic analysis method entitled: Harmonic Balance Method (HBM) for power system and distributed energy system (DES). This method can calculate all forms of harmonics generated from nonlinear inductive loads, DER units and saturated transformers; therefore it can provide accurate prediction of harmonic components for active power filters (APFs) and control systems.

Original language	English
Title of host publication	Proceedings of the 2016 Australasian Universities Power Engineering Conference, AUPEC 2016
Place of Publication	Piscataway, NJ
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	1-6
Number of pages	6
ISBN (Electronic)	9781509014057
DOIs	https://doi.org/10.1109/AUPEC.2016.7749373
Publication status	Published - 18 Nov 2016
Externally published	Yes
Event	2016 Australasian Universities Power Engineering Conference, AUPEC 2016 - Brisbane, Australia Duration: 25 Sept 2016 → 28 Sept 2016

Other

Other	2016 Australasian Universities Power Engineering Conference, AUPEC 2016
Country/Territory	Australia
City	Brisbane
Period	25/09/16 → 28/09/16

Keywords

harmonic Balance method
harmonic distortion
harmonic prodiction
active power filter
renewable energy systems

Access to Document

10.1109/AUPEC.2016.7749373

Cite this

@inproceedings{dade3a0c5bd7435e99856e45471c8eb2,

title = "Harmonic balance method used for harmonics calculation and prediction in power systems",

abstract = "In power systems harmonic distortion is mainly caused by non-linear loads and power electronics used in different devices and distributed renewable energy systems. In recent years, the presence of non-linear loads and the increasing number of distributed energy resource (DER) units in electrical grids contribute significantly to change the characteristics of voltage and current waveforms in power systems. This paper proposes a novel accurate and effective harmonic analysis method entitled: Harmonic Balance Method (HBM) for power system and distributed energy system (DES). This method can calculate all forms of harmonics generated from nonlinear inductive loads, DER units and saturated transformers; therefore it can provide accurate prediction of harmonic components for active power filters (APFs) and control systems.",

keywords = "harmonic Balance method, harmonic distortion, harmonic prodiction, active power filter, renewable energy systems",

author = "Junwei Lu and Seyedfoad Taghizadeh and Hossain, \{M. J.\} and Xiaojun Zhao",

year = "2016",

month = nov,

day = "18",

doi = "10.1109/AUPEC.2016.7749373",

language = "English",

pages = "1--6",

booktitle = "Proceedings of the 2016 Australasian Universities Power Engineering Conference, AUPEC 2016",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

note = "2016 Australasian Universities Power Engineering Conference, AUPEC 2016 ; Conference date: 25-09-2016 Through 28-09-2016",

}

Lu, J, Taghizadeh, S, Hossain, MJ & Zhao, X 2016, Harmonic balance method used for harmonics calculation and prediction in power systems. in Proceedings of the 2016 Australasian Universities Power Engineering Conference, AUPEC 2016., 7749373, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, NJ, pp. 1-6, 2016 Australasian Universities Power Engineering Conference, AUPEC 2016, Brisbane, Australia, 25/09/16. https://doi.org/10.1109/AUPEC.2016.7749373

Harmonic balance method used for harmonics calculation and prediction in power systems. / Lu, Junwei; Taghizadeh, Seyedfoad; Hossain, M. J. et al.
Proceedings of the 2016 Australasian Universities Power Engineering Conference, AUPEC 2016. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE), 2016. p. 1-6 7749373.

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

TY - GEN

T1 - Harmonic balance method used for harmonics calculation and prediction in power systems

AU - Lu, Junwei

AU - Taghizadeh, Seyedfoad

AU - Hossain, M. J.

AU - Zhao, Xiaojun

PY - 2016/11/18

Y1 - 2016/11/18

N2 - In power systems harmonic distortion is mainly caused by non-linear loads and power electronics used in different devices and distributed renewable energy systems. In recent years, the presence of non-linear loads and the increasing number of distributed energy resource (DER) units in electrical grids contribute significantly to change the characteristics of voltage and current waveforms in power systems. This paper proposes a novel accurate and effective harmonic analysis method entitled: Harmonic Balance Method (HBM) for power system and distributed energy system (DES). This method can calculate all forms of harmonics generated from nonlinear inductive loads, DER units and saturated transformers; therefore it can provide accurate prediction of harmonic components for active power filters (APFs) and control systems.

AB - In power systems harmonic distortion is mainly caused by non-linear loads and power electronics used in different devices and distributed renewable energy systems. In recent years, the presence of non-linear loads and the increasing number of distributed energy resource (DER) units in electrical grids contribute significantly to change the characteristics of voltage and current waveforms in power systems. This paper proposes a novel accurate and effective harmonic analysis method entitled: Harmonic Balance Method (HBM) for power system and distributed energy system (DES). This method can calculate all forms of harmonics generated from nonlinear inductive loads, DER units and saturated transformers; therefore it can provide accurate prediction of harmonic components for active power filters (APFs) and control systems.

KW - harmonic Balance method

KW - harmonic distortion

KW - harmonic prodiction

KW - active power filter

KW - renewable energy systems

UR - https://www.scopus.com/pages/publications/85006789348

U2 - 10.1109/AUPEC.2016.7749373

DO - 10.1109/AUPEC.2016.7749373

M3 - Conference proceeding contribution

AN - SCOPUS:85006789348

SP - 1

EP - 6

BT - Proceedings of the 2016 Australasian Universities Power Engineering Conference, AUPEC 2016

PB - Institute of Electrical and Electronics Engineers (IEEE)

CY - Piscataway, NJ

T2 - 2016 Australasian Universities Power Engineering Conference, AUPEC 2016

Y2 - 25 September 2016 through 28 September 2016

ER -

Harmonic balance method used for harmonics calculation and prediction in power systems

Abstract

Other

Keywords

Access to Document

Other files and links

Fingerprint

Cite this