Microcontroller-based sensors and instrumentation for Roll-to-Roll application

S. Tsai; S. C. Mukhopadhyay; N. Yoksen; J. Y. Chang

doi:10.1109/ICSensT.2012.6461774

Microcontroller-based sensors and instrumentation for Roll-to-Roll application

S. Tsai^*, S. C. Mukhopadhyay, N. Yoksen, J. Y. Chang

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

1 Citation (Scopus)

Abstract

This paper presents instrumentation and interfacing between microcontroller and sensors/actuator for Roll-to-Roll system. Load cell, edge sensor and brake are commonly used sensors and actuator in the system. However, additional sensor calibration and linearization are required for mechatronic integration of the system. An experimental study was carried out to outline sensor characteristics before and after the signal conditioning. The sensors and actuator were linearized using straight line fitting and Taylor series expansion. Experimental results are illustrated and examined to be working.

Original language	English
Title of host publication	2012 6th International Conference on Sensing Technology, ICST 2012
Place of Publication	Piscataway, NJ
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	729-733
Number of pages	5
ISBN (Print)	9781467322485
DOIs	https://doi.org/10.1109/ICSensT.2012.6461774
Publication status	Published - 2012
Externally published	Yes
Event	2012 6th International Conference on Sensing Technology, ICST 2012 - Kolkata, India Duration: 18 Dec 2012 → 21 Dec 2012

Other

Other	2012 6th International Conference on Sensing Technology, ICST 2012
Country/Territory	India
City	Kolkata
Period	18/12/12 → 21/12/12

Access to Document

10.1109/ICSensT.2012.6461774

Cite this

@inproceedings{7d2c1dabd9e949fe8d4c857b1b4d5293,

title = "Microcontroller-based sensors and instrumentation for Roll-to-Roll application",

abstract = "This paper presents instrumentation and interfacing between microcontroller and sensors/actuator for Roll-to-Roll system. Load cell, edge sensor and brake are commonly used sensors and actuator in the system. However, additional sensor calibration and linearization are required for mechatronic integration of the system. An experimental study was carried out to outline sensor characteristics before and after the signal conditioning. The sensors and actuator were linearized using straight line fitting and Taylor series expansion. Experimental results are illustrated and examined to be working.",

author = "S. Tsai and Mukhopadhyay, {S. C.} and N. Yoksen and Chang, {J. Y.}",

year = "2012",

doi = "10.1109/ICSensT.2012.6461774",

language = "English",

isbn = "9781467322485",

pages = "729--733",

booktitle = "2012 6th International Conference on Sensing Technology, ICST 2012",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

note = "2012 6th International Conference on Sensing Technology, ICST 2012 ; Conference date: 18-12-2012 Through 21-12-2012",

}

Tsai, S, Mukhopadhyay, SC, Yoksen, N & Chang, JY 2012, Microcontroller-based sensors and instrumentation for Roll-to-Roll application. in 2012 6th International Conference on Sensing Technology, ICST 2012., 6461774, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, NJ, pp. 729-733, 2012 6th International Conference on Sensing Technology, ICST 2012, Kolkata, India, 18/12/12. https://doi.org/10.1109/ICSensT.2012.6461774

Microcontroller-based sensors and instrumentation for Roll-to-Roll application. / Tsai, S.; Mukhopadhyay, S. C.; Yoksen, N. et al.
2012 6th International Conference on Sensing Technology, ICST 2012. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE), 2012. p. 729-733 6461774.

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

TY - GEN

T1 - Microcontroller-based sensors and instrumentation for Roll-to-Roll application

AU - Tsai, S.

AU - Mukhopadhyay, S. C.

AU - Yoksen, N.

AU - Chang, J. Y.

PY - 2012

Y1 - 2012

N2 - This paper presents instrumentation and interfacing between microcontroller and sensors/actuator for Roll-to-Roll system. Load cell, edge sensor and brake are commonly used sensors and actuator in the system. However, additional sensor calibration and linearization are required for mechatronic integration of the system. An experimental study was carried out to outline sensor characteristics before and after the signal conditioning. The sensors and actuator were linearized using straight line fitting and Taylor series expansion. Experimental results are illustrated and examined to be working.

AB - This paper presents instrumentation and interfacing between microcontroller and sensors/actuator for Roll-to-Roll system. Load cell, edge sensor and brake are commonly used sensors and actuator in the system. However, additional sensor calibration and linearization are required for mechatronic integration of the system. An experimental study was carried out to outline sensor characteristics before and after the signal conditioning. The sensors and actuator were linearized using straight line fitting and Taylor series expansion. Experimental results are illustrated and examined to be working.

UR - http://www.scopus.com/inward/record.url?scp=84874670879&partnerID=8YFLogxK

U2 - 10.1109/ICSensT.2012.6461774

DO - 10.1109/ICSensT.2012.6461774

M3 - Conference proceeding contribution

AN - SCOPUS:84874670879

SN - 9781467322485

SP - 729

EP - 733

BT - 2012 6th International Conference on Sensing Technology, ICST 2012

PB - Institute of Electrical and Electronics Engineers (IEEE)

CY - Piscataway, NJ

T2 - 2012 6th International Conference on Sensing Technology, ICST 2012

Y2 - 18 December 2012 through 21 December 2012

ER -

Microcontroller-based sensors and instrumentation for Roll-to-Roll application

Abstract

Other

Access to Document

Other files and links

Fingerprint

Cite this