TY - JOUR
T1 - Multiscale modelling framework for elasticity of ultra high strength concrete using nano/microscale characterization and finite element representative volume element analysis
AU - Thilakarathna, P. S. M.
AU - Kristombu Baduge, K. S.
AU - Mendis, P.
AU - Lee, H.
AU - Chandrathilaka, E. R. K.
AU - Vimonsatit, V.
PY - 2022/4/11
Y1 - 2022/4/11
N2 - Ultra-High Strength Concrete (UHSC) (greater than 100 MPa) is a mechanically superior material compared with the Normal Strength Concrete (NSC) due to its inherent performance characteristics. Improved modulus of elasticity is one of the key target characteristics in the development of UHSC. Macroscopic response of UHSC is a result of a multitude of phases in different spatial length scales such as mesoscale, microscale, nanoscale etc. and investigating these spatial scales can yield a better understanding about contribution of each heterogenous phases to the macroscopic behaviour of UHSC. In this paper, a new multiscale modelling method including procedures to obtain micro/nano scale properties is proposed to predict the macroscopic elastic modulus using nanoindentation experiments, hydration simulations, Scanning Electron Microscopy (SEM) and Finite Element Representative Volume Element (FE-RVE) modelling. Characterization of nanomechanical properties of the cementitious composite was carried out using nanoindentation, microstructural characterization was performed using scanning electron microscopy, and hydration simulation of the cementitious paste was carried out using Virtual Cement and Concrete Testing Laboratory (VCCTL) software. A five-level multiscale framework is proposed for UHSC and results from these experimental testing and simulations were used as inputs in the proposed framework. A novel algorithm which can model any volume fraction of different phases was developed to generate geometries for RVEs to be used in FE-RVE simulations. Upscaling of elastic modulus using FE-RVE was found to be very accurate, and this method can generate detailed variation of microfields inside the RVE. A parametric study was carried out on how varying inhomogeneities in the RVE, boundary conditions, and the shape of the inhomogeneities would affect the homogenized elastic modulus. Continuum micromechanics models such as Mori-Tanaka method and Self Consistent Scheme were used for the analytical homogenization at each scale for comparison with FE-RVE method. The results of the proposed FE-RVE analysis, the Mean Field Homogenization (MFH) method, and experiment were compared and found to be a very good fit.
AB - Ultra-High Strength Concrete (UHSC) (greater than 100 MPa) is a mechanically superior material compared with the Normal Strength Concrete (NSC) due to its inherent performance characteristics. Improved modulus of elasticity is one of the key target characteristics in the development of UHSC. Macroscopic response of UHSC is a result of a multitude of phases in different spatial length scales such as mesoscale, microscale, nanoscale etc. and investigating these spatial scales can yield a better understanding about contribution of each heterogenous phases to the macroscopic behaviour of UHSC. In this paper, a new multiscale modelling method including procedures to obtain micro/nano scale properties is proposed to predict the macroscopic elastic modulus using nanoindentation experiments, hydration simulations, Scanning Electron Microscopy (SEM) and Finite Element Representative Volume Element (FE-RVE) modelling. Characterization of nanomechanical properties of the cementitious composite was carried out using nanoindentation, microstructural characterization was performed using scanning electron microscopy, and hydration simulation of the cementitious paste was carried out using Virtual Cement and Concrete Testing Laboratory (VCCTL) software. A five-level multiscale framework is proposed for UHSC and results from these experimental testing and simulations were used as inputs in the proposed framework. A novel algorithm which can model any volume fraction of different phases was developed to generate geometries for RVEs to be used in FE-RVE simulations. Upscaling of elastic modulus using FE-RVE was found to be very accurate, and this method can generate detailed variation of microfields inside the RVE. A parametric study was carried out on how varying inhomogeneities in the RVE, boundary conditions, and the shape of the inhomogeneities would affect the homogenized elastic modulus. Continuum micromechanics models such as Mori-Tanaka method and Self Consistent Scheme were used for the analytical homogenization at each scale for comparison with FE-RVE method. The results of the proposed FE-RVE analysis, the Mean Field Homogenization (MFH) method, and experiment were compared and found to be a very good fit.
KW - Representative Volume Element
KW - Finite Element Method
KW - Finite Element Representative Volume Element Analysis
KW - Continuum Micromechanics
KW - Ultra High Strength Concrete
KW - Mean Field Homogenization
KW - Scanning Electron Microscopy
KW - Hydration Simulations
UR - http://www.scopus.com/inward/record.url?scp=85125494247&partnerID=8YFLogxK
U2 - 10.1016/j.conbuildmat.2022.126968
DO - 10.1016/j.conbuildmat.2022.126968
M3 - Article
AN - SCOPUS:85125494247
SN - 0950-0618
VL - 327
SP - 1
EP - 25
JO - Construction and Building Materials
JF - Construction and Building Materials
M1 - 126968
ER -