Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination

Avanish Bhadauria; Enakshi Khular Sharma; A. K. Verma; B. R. Singh

doi:10.1109/MWP.2008.4666655

Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination

Avanish Bhadauria^*, Enakshi Khular Sharma, A. K. Verma, B. R. Singh

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

1 Citation (Scopus)

Abstract

In this paper we have studied the optical control of transmission behaviour of λg/4 microstrip stub on a microstrip line fabricated on high resistivity silicon substrate by illuminating open end of λg/4 stub. Here, we have used two different optical wavelength sources 650nm and 850 nm to illuminate the open end of stub. An optical illumination at the end of an open λg/4 stub on a microstrip line has been shown to control the transmitted power at the design frequency which can be used as an optically controlled rf switching or attenuator and further can be used as an optically controlled narrow band matching and stub based filters. In addition to experimental measurement we have also carried out modelling of optically generated load at the end for both the wavelengths along with the simulation on Ansoft Maxwell simulator. The measurement results compare well with those predicted by a simulation carried out on the Ansoft Maxwell Ensemble for both the wavelengths.

Original language	English
Title of host publication	2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008
Place of Publication	Piscataway, NJ
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	138-141
Number of pages	4
ISBN (Print)	9781424421695
DOIs	https://doi.org/10.1109/MWP.2008.4666655
Publication status	Published - 2008
Externally published	Yes
Event	2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008 - Gold Coast, QLD, Australia Duration: 30 Sept 2008 → 3 Oct 2008

Other

Other	2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008
Country/Territory	Australia
City	Gold Coast, QLD
Period	30/09/08 → 3/10/08

Access to Document

10.1109/MWP.2008.4666655

Cite this

Bhadauria, A., Sharma, E. K., Verma, A. K., & Singh, B. R. (2008). Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination. In 2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008 (pp. 138-141). [4666655] Institute of Electrical and Electronics Engineers (IEEE). https://doi.org/10.1109/MWP.2008.4666655

Bhadauria, Avanish ; Sharma, Enakshi Khular ; Verma, A. K. et al. / Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination. 2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008. Piscataway, NJ : Institute of Electrical and Electronics Engineers (IEEE), 2008. pp. 138-141

@inproceedings{0821e68137c14973ab81f89c17d024f4,

title = "Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination",

abstract = "In this paper we have studied the optical control of transmission behaviour of λg/4 microstrip stub on a microstrip line fabricated on high resistivity silicon substrate by illuminating open end of λg/4 stub. Here, we have used two different optical wavelength sources 650nm and 850 nm to illuminate the open end of stub. An optical illumination at the end of an open λg/4 stub on a microstrip line has been shown to control the transmitted power at the design frequency which can be used as an optically controlled rf switching or attenuator and further can be used as an optically controlled narrow band matching and stub based filters. In addition to experimental measurement we have also carried out modelling of optically generated load at the end for both the wavelengths along with the simulation on Ansoft Maxwell simulator. The measurement results compare well with those predicted by a simulation carried out on the Ansoft Maxwell Ensemble for both the wavelengths.",

author = "Avanish Bhadauria and Sharma, {Enakshi Khular} and Verma, {A. K.} and Singh, {B. R.}",

year = "2008",

doi = "10.1109/MWP.2008.4666655",

language = "English",

isbn = "9781424421695",

pages = "138--141",

booktitle = "2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

note = "2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008 ; Conference date: 30-09-2008 Through 03-10-2008",

}

Bhadauria, A, Sharma, EK, Verma, AK & Singh, BR 2008, Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination. in 2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008., 4666655, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, NJ, pp. 138-141, 2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008, Gold Coast, QLD, Australia, 30/09/08. https://doi.org/10.1109/MWP.2008.4666655

Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination. / Bhadauria, Avanish; Sharma, Enakshi Khular; Verma, A. K. et al.
2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE), 2008. p. 138-141 4666655.

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

TY - GEN

T1 - Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination

AU - Bhadauria, Avanish

AU - Sharma, Enakshi Khular

AU - Verma, A. K.

AU - Singh, B. R.

PY - 2008

Y1 - 2008

N2 - In this paper we have studied the optical control of transmission behaviour of λg/4 microstrip stub on a microstrip line fabricated on high resistivity silicon substrate by illuminating open end of λg/4 stub. Here, we have used two different optical wavelength sources 650nm and 850 nm to illuminate the open end of stub. An optical illumination at the end of an open λg/4 stub on a microstrip line has been shown to control the transmitted power at the design frequency which can be used as an optically controlled rf switching or attenuator and further can be used as an optically controlled narrow band matching and stub based filters. In addition to experimental measurement we have also carried out modelling of optically generated load at the end for both the wavelengths along with the simulation on Ansoft Maxwell simulator. The measurement results compare well with those predicted by a simulation carried out on the Ansoft Maxwell Ensemble for both the wavelengths.

AB - In this paper we have studied the optical control of transmission behaviour of λg/4 microstrip stub on a microstrip line fabricated on high resistivity silicon substrate by illuminating open end of λg/4 stub. Here, we have used two different optical wavelength sources 650nm and 850 nm to illuminate the open end of stub. An optical illumination at the end of an open λg/4 stub on a microstrip line has been shown to control the transmitted power at the design frequency which can be used as an optically controlled rf switching or attenuator and further can be used as an optically controlled narrow band matching and stub based filters. In addition to experimental measurement we have also carried out modelling of optically generated load at the end for both the wavelengths along with the simulation on Ansoft Maxwell simulator. The measurement results compare well with those predicted by a simulation carried out on the Ansoft Maxwell Ensemble for both the wavelengths.

UR - http://www.scopus.com/inward/record.url?scp=58049220951&partnerID=8YFLogxK

U2 - 10.1109/MWP.2008.4666655

DO - 10.1109/MWP.2008.4666655

M3 - Conference proceeding contribution

AN - SCOPUS:58049220951

SN - 9781424421695

SP - 138

EP - 141

BT - 2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008

PB - Institute of Electrical and Electronics Engineers (IEEE)

CY - Piscataway, NJ

T2 - 2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008

Y2 - 30 September 2008 through 3 October 2008

ER -

Bhadauria A, Sharma EK, Verma AK, Singh BR. Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination. In 2008 IEEE International Meeting on Microwave Photonics jointly held with the 2008 Asia-Pacific Microwave Photonics Conference, MWP2008/APMP2008. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE). 2008. p. 138-141. 4666655 doi: 10.1109/MWP.2008.4666655

Optical control of microstrip stub on silicon substrate using 650 nm and 850 nm wavelengths illumination

Abstract

Other

Access to Document

Other files and links

Fingerprint

Cite this