Patterned surface with added corrugations in view of displacing EBGs to lower frequencies

Ladislau Matekovits; Aldo De Sabata

doi:10.1109/APS.2013.6710701

Patterned surface with added corrugations in view of displacing EBGs to lower frequencies

Ladislau Matekovits, Aldo De Sabata

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

2 Citations (Scopus)

Abstract

We consider a periodic structure that consists of on a 3D geometry periodically repeated in a plane embedded between two dielectric layers covered with metal planes. The geometry consists of a circular metal patch connected to the ground plane by four metal vias. Additionally to these reactive loads, a volumetric corrugation is further considered, that will be responsible for the shift toward low frequency of the existing one or two electromagnetic band gaps (EBGs). In this way, the proposed structure becomes suitable for signal integrity applications. The investigation of waveguiding-related properties has been accomplished by full-wave electromagnetic simulation.

Original language	English
Title of host publication	2013 IEEE Antennas and Propagation Society International Symposium
Subtitle of host publication	proceedings
Place of Publication	Piscataway, NJ
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	81-82
Number of pages	2
ISBN (Electronic)	9781467353175, 9781467353151
ISBN (Print)	9781467353168
DOIs	https://doi.org/10.1109/APS.2013.6710701
Publication status	Published - 2013
Externally published	Yes
Event	2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013 - Orlando, FL, United States Duration: 7 Jul 2013 → 13 Jul 2013

Publication series

Name	IEEE Antennas and Propagation Society, International Symposium Digest
Publisher	IEEE
ISSN (Print)	1522-3965
ISSN (Electronic)	1947-1491

Other

Other	2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013
Country/Territory	United States
City	Orlando, FL
Period	7/07/13 → 13/07/13

Access to Document

10.1109/APS.2013.6710701

Cite this

Matekovits, L., & De Sabata, A. (2013). Patterned surface with added corrugations in view of displacing EBGs to lower frequencies. In 2013 IEEE Antennas and Propagation Society International Symposium: proceedings (pp. 81-82). (IEEE Antennas and Propagation Society, International Symposium Digest). Institute of Electrical and Electronics Engineers (IEEE). https://doi.org/10.1109/APS.2013.6710701

Matekovits, Ladislau ; De Sabata, Aldo. / Patterned surface with added corrugations in view of displacing EBGs to lower frequencies. 2013 IEEE Antennas and Propagation Society International Symposium: proceedings. Piscataway, NJ : Institute of Electrical and Electronics Engineers (IEEE), 2013. pp. 81-82 (IEEE Antennas and Propagation Society, International Symposium Digest).

@inproceedings{b164e4c313fd43bc92fd288790af322b,

title = "Patterned surface with added corrugations in view of displacing EBGs to lower frequencies",

abstract = "We consider a periodic structure that consists of on a 3D geometry periodically repeated in a plane embedded between two dielectric layers covered with metal planes. The geometry consists of a circular metal patch connected to the ground plane by four metal vias. Additionally to these reactive loads, a volumetric corrugation is further considered, that will be responsible for the shift toward low frequency of the existing one or two electromagnetic band gaps (EBGs). In this way, the proposed structure becomes suitable for signal integrity applications. The investigation of waveguiding-related properties has been accomplished by full-wave electromagnetic simulation.",

author = "Ladislau Matekovits and {De Sabata}, Aldo",

year = "2013",

doi = "10.1109/APS.2013.6710701",

language = "English",

isbn = "9781467353168",

series = "IEEE Antennas and Propagation Society, International Symposium Digest",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

pages = "81--82",

booktitle = "2013 IEEE Antennas and Propagation Society International Symposium",

address = "United States",

note = "2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013 ; Conference date: 07-07-2013 Through 13-07-2013",

}

Matekovits, L & De Sabata, A 2013, Patterned surface with added corrugations in view of displacing EBGs to lower frequencies. in 2013 IEEE Antennas and Propagation Society International Symposium: proceedings. IEEE Antennas and Propagation Society, International Symposium Digest, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, NJ, pp. 81-82, 2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013, Orlando, FL, United States, 7/07/13. https://doi.org/10.1109/APS.2013.6710701

Patterned surface with added corrugations in view of displacing EBGs to lower frequencies. / Matekovits, Ladislau; De Sabata, Aldo.

2013 IEEE Antennas and Propagation Society International Symposium: proceedings. Piscataway, NJ : Institute of Electrical and Electronics Engineers (IEEE), 2013. p. 81-82 (IEEE Antennas and Propagation Society, International Symposium Digest).

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

TY - GEN

T1 - Patterned surface with added corrugations in view of displacing EBGs to lower frequencies

AU - Matekovits, Ladislau

AU - De Sabata, Aldo

PY - 2013

Y1 - 2013

N2 - We consider a periodic structure that consists of on a 3D geometry periodically repeated in a plane embedded between two dielectric layers covered with metal planes. The geometry consists of a circular metal patch connected to the ground plane by four metal vias. Additionally to these reactive loads, a volumetric corrugation is further considered, that will be responsible for the shift toward low frequency of the existing one or two electromagnetic band gaps (EBGs). In this way, the proposed structure becomes suitable for signal integrity applications. The investigation of waveguiding-related properties has been accomplished by full-wave electromagnetic simulation.

AB - We consider a periodic structure that consists of on a 3D geometry periodically repeated in a plane embedded between two dielectric layers covered with metal planes. The geometry consists of a circular metal patch connected to the ground plane by four metal vias. Additionally to these reactive loads, a volumetric corrugation is further considered, that will be responsible for the shift toward low frequency of the existing one or two electromagnetic band gaps (EBGs). In this way, the proposed structure becomes suitable for signal integrity applications. The investigation of waveguiding-related properties has been accomplished by full-wave electromagnetic simulation.

UR - http://www.scopus.com/inward/record.url?scp=84894194754&partnerID=8YFLogxK

U2 - 10.1109/APS.2013.6710701

DO - 10.1109/APS.2013.6710701

M3 - Conference proceeding contribution

AN - SCOPUS:84894194754

SN - 9781467353168

T3 - IEEE Antennas and Propagation Society, International Symposium Digest

SP - 81

EP - 82

BT - 2013 IEEE Antennas and Propagation Society International Symposium

PB - Institute of Electrical and Electronics Engineers (IEEE)

CY - Piscataway, NJ

T2 - 2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013

Y2 - 7 July 2013 through 13 July 2013

ER -

Matekovits L, De Sabata A. Patterned surface with added corrugations in view of displacing EBGs to lower frequencies. In 2013 IEEE Antennas and Propagation Society International Symposium: proceedings. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE). 2013. p. 81-82. (IEEE Antennas and Propagation Society, International Symposium Digest). https://doi.org/10.1109/APS.2013.6710701

Patterned surface with added corrugations in view of displacing EBGs to lower frequencies

Abstract

Publication series

Other

Access to Document

Other files and links

Fingerprint

Cite this