Radiation characteristics of three dimensional printed meta-surface in broadside condition

Sujan Shrestha; Syed Muzahir Abbas; Mohsen Asadnia; Karu P. Esselle

doi:10.1109/ISAP53582.2022.9998713

Radiation characteristics of three dimensional printed meta-surface in broadside condition

Sujan Shrestha^*, Syed Muzahir Abbas, Mohsen Asadnia, Karu P. Esselle

^*Corresponding author for this work

School of Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

Abstract

Broadside condition of Three dimensional printed Meta-surface is presented in this paper. Cubes arranged in specific patterns are considered to design the Beam Deviating Surface (BDS) and Conical Rotating Surface (CRS) where both the surfaces are arranged opposite to each other as per the increasing phase gradient. Two surfaces are 120 mm × 120 mm × 30 mm (4.8λ × 4.8λ × 1.2λ) in dimensions. The measured broadside radiation patterns in 180 degree case of orientation for CRS prototype matches well with simulated results and are wide band in operation. The measured directivity and gain values were maintained from 17 to 23 dBi throughout the operating Ku band frequency range.

Original language	English
Title of host publication	2022 International Symposium on Antennas and Propagation (ISAP)
Place of Publication	Piscataway, NJ
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	73-74
Number of pages	2
ISBN (Electronic)	9781665479622
ISBN (Print)	9781665479639
DOIs	https://doi.org/10.1109/ISAP53582.2022.9998713
Publication status	Published - 2022
Event	27th International Symposium on Antennas and Propagation, ISAP 2022 - Sydney, Australia Duration: 31 Oct 2022 → 3 Nov 2022

Conference

Conference	27th International Symposium on Antennas and Propagation, ISAP 2022
Country/Territory	Australia
City	Sydney
Period	31/10/22 → 3/11/22

Access to Document

10.1109/ISAP53582.2022.9998713

Cite this

@inproceedings{677c15efbaf640baab9ec9c0ec1f9c91,

title = "Radiation characteristics of three dimensional printed meta-surface in broadside condition",

abstract = "Broadside condition of Three dimensional printed Meta-surface is presented in this paper. Cubes arranged in specific patterns are considered to design the Beam Deviating Surface (BDS) and Conical Rotating Surface (CRS) where both the surfaces are arranged opposite to each other as per the increasing phase gradient. Two surfaces are 120 mm × 120 mm × 30 mm (4.8λ × 4.8λ × 1.2λ) in dimensions. The measured broadside radiation patterns in 180 degree case of orientation for CRS prototype matches well with simulated results and are wide band in operation. The measured directivity and gain values were maintained from 17 to 23 dBi throughout the operating Ku band frequency range. ",

author = "Sujan Shrestha and Abbas, \{Syed Muzahir\} and Mohsen Asadnia and Esselle, \{Karu P.\}",

year = "2022",

doi = "10.1109/ISAP53582.2022.9998713",

language = "English",

isbn = "9781665479639",

pages = "73--74",

booktitle = "2022 International Symposium on Antennas and Propagation (ISAP)",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

note = "27th International Symposium on Antennas and Propagation, ISAP 2022 ; Conference date: 31-10-2022 Through 03-11-2022",

}

Shrestha, S , Abbas, SM , Asadnia, M & Esselle, KP 2022, Radiation characteristics of three dimensional printed meta-surface in broadside condition. in 2022 International Symposium on Antennas and Propagation (ISAP). Institute of Electrical and Electronics Engineers (IEEE), Piscataway, NJ, pp. 73-74, 27th International Symposium on Antennas and Propagation, ISAP 2022, Sydney, Australia, 31/10/22. https://doi.org/10.1109/ISAP53582.2022.9998713

Radiation characteristics of three dimensional printed meta-surface in broadside condition. / Shrestha, Sujan ; Abbas, Syed Muzahir ; Asadnia, Mohsen et al.
2022 International Symposium on Antennas and Propagation (ISAP). Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE), 2022. p. 73-74.

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding contribution › peer-review

TY - GEN

T1 - Radiation characteristics of three dimensional printed meta-surface in broadside condition

AU - Shrestha, Sujan

AU - Abbas, Syed Muzahir

AU - Asadnia, Mohsen

AU - Esselle, Karu P.

PY - 2022

Y1 - 2022

N2 - Broadside condition of Three dimensional printed Meta-surface is presented in this paper. Cubes arranged in specific patterns are considered to design the Beam Deviating Surface (BDS) and Conical Rotating Surface (CRS) where both the surfaces are arranged opposite to each other as per the increasing phase gradient. Two surfaces are 120 mm × 120 mm × 30 mm (4.8λ × 4.8λ × 1.2λ) in dimensions. The measured broadside radiation patterns in 180 degree case of orientation for CRS prototype matches well with simulated results and are wide band in operation. The measured directivity and gain values were maintained from 17 to 23 dBi throughout the operating Ku band frequency range.

AB - Broadside condition of Three dimensional printed Meta-surface is presented in this paper. Cubes arranged in specific patterns are considered to design the Beam Deviating Surface (BDS) and Conical Rotating Surface (CRS) where both the surfaces are arranged opposite to each other as per the increasing phase gradient. Two surfaces are 120 mm × 120 mm × 30 mm (4.8λ × 4.8λ × 1.2λ) in dimensions. The measured broadside radiation patterns in 180 degree case of orientation for CRS prototype matches well with simulated results and are wide band in operation. The measured directivity and gain values were maintained from 17 to 23 dBi throughout the operating Ku band frequency range.

UR - https://www.scopus.com/pages/publications/85146733982

U2 - 10.1109/ISAP53582.2022.9998713

DO - 10.1109/ISAP53582.2022.9998713

M3 - Conference proceeding contribution

AN - SCOPUS:85146733982

SN - 9781665479639

SP - 73

EP - 74

BT - 2022 International Symposium on Antennas and Propagation (ISAP)

PB - Institute of Electrical and Electronics Engineers (IEEE)

CY - Piscataway, NJ

T2 - 27th International Symposium on Antennas and Propagation, ISAP 2022

Y2 - 31 October 2022 through 3 November 2022

ER -

Radiation characteristics of three dimensional printed meta-surface in broadside condition

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this